2024 Locomotive 4 8 4

Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 .... 425 681 6830

The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain". Jun 19, 2006 · Canadian National and its subsidiaries owned North America’s largest fleet of 4-8-4s, including five streamlined versions built in 1936 to haul passenger trains between Montreal and Toronto. James Adams Dual-purpose Northerns followed, with examples going to Canadian National, Grand Trunk Western, Burlington, and Chicago & North Western. Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1] Union Pacific 844 is a class "FEF-3" 4-8-4 "Northern" type steam locomotive owned and operated by the Union Pacific Railroad for its heritage fleet.Built in December 1944 by the American Locomotive Company (ALCO) of Schenectady, New York, No. 844 is one of four surviving FEF series locomotives and the only one in operation.Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. May 9, 2022 · Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598 The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927. The Baldwin 4-8+8-4 750/8DE1 was the Baldwin Locomotive Works ' first attempt at building a road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built. In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000.Shop our full model locomotive inventory & order online today! ... Broadway Limited 7234 N ALCo 4-8-8-4 Big Boy, Paragon4 DCC Sound, Union Pacific #4022 Post-1944May 8, 2023 · The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph! Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US.Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. Bachmann Trains Online Store! : 4-8-4 Northern - Gift Shop Catalogs HO Parts Large Scale Parts N Parts On30 Parts General Parts & Supplies O Scale - Williams Track DCC Sound Boards E-Z App boards Locomotive / Tender Speakers All Scale Kit Bashing ecommerce, open source, shop, online shopping, storeSwiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ...Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. 4-8-4. Benefits. Better high speed performance. Drawbacks. Wheel slip. A 4-4-4-4 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement ...What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ... The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. 4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ...The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483,The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... The first United States 4-8-2s were in the employment of the C&O as the J-1 design, in 1911. Unlike the Hendrie 4-8-2s, this was basically an enlarged 4-6-2 for passenger trains over the Appalachians. The 4-8-2s used by the New York Central, the "Mohawks" were also an enlarged 4-6-2, essentially a K-11 type with an extra axle.Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US. She was the last of three K-4-b class Pacifics built for the Grand Trunk Western by Baldwin Locomotive Works in 1929. They featured enclosed or vestibule cabs similar to those on GTW's 4-8-4s and 4-8-2s, and also introduced the exhaust steam injector in place of the feedwater heater of the K-4-a class. This photo was taken in the summer of 1953.Santa Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ...The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display. The first United States 4-8-2s were in the employment of the C&O as the J-1 design, in 1911. Unlike the Hendrie 4-8-2s, this was basically an enlarged 4-6-2 for passenger trains over the Appalachians. The 4-8-2s used by the New York Central, the "Mohawks" were also an enlarged 4-6-2, essentially a K-11 type with an extra axle.Feb 9, 2018 · Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting. The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. Reading 2101 is a preserved American class "T-1" 4-8-4 "Northern" type steam locomotive constructed in 1945 for use by the Reading Company.Constructed from an earlier "I10SA" 2-8-0 "Consolidation"-type locomotive built in 1923, the 2101 handled heavy coal train traffic for the Reading until being retired from revenue service in 1959.Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ...S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight.. Oct 19, 2018 · In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works. The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... The Lima-Southern Pacific GS-4 ("GS" meaning for "Golden State" or "General Service") is a type of semi-streamlined 4-8-4 Northern steam locomotive built by the Lima Locomotive Works in 1941 and 1942 specifically for the Southern Pacific (SP) Railroad. They were assigned road numbers 4430 through 4457. The GS-4s were principally employed on SP's famous "Daylight" streamliners from 1941, but in ...Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ...There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939.The Union Pacific FEF series consists of 45 4-8-4 "Northern" steam locomotives built by the American Locomotive Company (ALCO) between 1937 and 1944 and operated by the Union Pacific Railroad until 1959. The final steam locomotives built for the Union Pacific, the FEFs represented the apex of dual-service steam locomotive development in the ...In the early 1940s, the Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns. These rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. They had 28 x 30 cylinders, a boiler pressure of 250 psi, a total ...Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph)Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used.Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ...N&W Class J 4-8-4 Designed for optimum-speed passenger service, the “J” was the last mainline steam locomotive to run in the United States. The Class J 4-8-4 has returned to the Bachmann HO line in a DCC Sound Value version that includes a SoundTraxx ® steam package with authentic prototypical chuff, short and long whistles, bell, air pump ... She was the last of three K-4-b class Pacifics built for the Grand Trunk Western by Baldwin Locomotive Works in 1929. They featured enclosed or vestibule cabs similar to those on GTW's 4-8-4s and 4-8-2s, and also introduced the exhaust steam injector in place of the feedwater heater of the K-4-a class. This photo was taken in the summer of 1953.The Soviet locomotive class P36 ( Russian: П36) was a Soviet mainline passenger steam locomotive type. Between 1950 and 1956, 251 locomotives were built. The locomotives were nicknamed "Generals" because of the red stripe down the side. The P36 had the same power as a class IS locomotive but the axle loading of 18 tons allowed its use on the ...Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ...Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ... 4-8-8-4: 4'-8½" UP: UP engine house, Cheyenne, WY: operational: Alco (Schenectady) #69585, 11/1941: From Pomona, CA. Reacquired by the Union Pacific in July 2013. Restored to operation on May 1, 2019. Converted to burn oil. Temporarily uses the tender of UP 3985. Became the first-ever steam locomotive to be equipped with Positive Train Control ...Number 4000 was delivered to Omaha at 6PM, September 5, 1941. The 25 Big Boys were built in two groups. The first group of 20 locomotives, called "Class 1", were built starting in 1941. They were numbered 4000-4019. The second group of 5 locomotives, "Class 2", were built in 1944. They were numbered 4020-4024. First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ...Santa Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) She was the last of three K-4-b class Pacifics built for the Grand Trunk Western by Baldwin Locomotive Works in 1929. They featured enclosed or vestibule cabs similar to those on GTW's 4-8-4s and 4-8-2s, and also introduced the exhaust steam injector in place of the feedwater heater of the K-4-a class. This photo was taken in the summer of 1953.October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ... The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph)The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...Union Pacific's own team, in conjunction with Alco (both parties had also collaborated on the 4-6-6-4), significantly enlarged the Challenger to create the 4-8-8-4 Big Boy. The locomotive offered a tractive effort of roughly 135,000 pounds (37,650 pounds more than its smaller cousin) with speeds capable of 80 mph.The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) 05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service." Unlike the GS-3, the GS-4 had a dual ...May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History

May 9, 2022 · Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598 . Sephora j

These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. This caught the attention of the Western Maryland and in 1947 it took delivery of twelve 4-8-4s from the Baldwin Locomotive Works. Being a "southern" railroad WM rejected the name "Northern" and called its 4-8-4s "Potomacs". These twelve Class J-1 "Potomacs" (road numbers 1401 through 1412) were designed for freight service with 69" drivers, 26 ...Number 4000 was delivered to Omaha at 6PM, September 5, 1941. The 25 Big Boys were built in two groups. The first group of 20 locomotives, called "Class 1", were built starting in 1941. They were numbered 4000-4019. The second group of 5 locomotives, "Class 2", were built in 1944. They were numbered 4020-4024. Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..Jim Wrinn. 4-8-4. •YEARS BUILT: 1926 to 1950. •MANUFACTURERS: Baldwin, Lima, Alco, Canadian Locomotive Co., Canadian Pacific Railway, Montreal, Norfolk & Western. •OPERATED ON: Most sizable railroads that provided fast freight and passenger service.2-8-8-8-4. Under the Whyte notation for the classification of steam locomotives, a 2-8-8-8-4 has two leading wheels, three sets of eight driving wheels, and four trailing wheels . The equivalent UIC classification is to be refined to (1'D)D (D2') for these engines. Only one 2-8-8-8-4 was ever built, a Mallet -type for the Virginian Railway in ...4-4-4T Cóndor of the Gran Ferrocarril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ...Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960.The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. The Santa Fe 2900 Class was a series of 30 4-8-4 type steam locomotives built between 1943 and 1944 for Atchison, Topeka and Santa Fe Railroad and pulled freight and passenger trains until retirement in the early to late-1950s. Today, six 2900s survive, with five units on static display and one, No. 2926, has been restored to operating ... Santa Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449..

Popular Topics